AR10635 - KSB Measuring device leakage monitor

Submersible Motor Pump with Mixed-Flow Impeller is used for applications in irrigation and drainage, in waterworks, sewage treatment plants, power stations, industrial water supply, aquaculture, water protection and disaster control. The pump is designed for pumping raw water, pure water, waste water, mixed water, activated sludge, rainwater, cooling water, dock water and sluice water. weniger anzeigen

The wet installed, submersible motor recirculation pump Amaline, with ECB propeller, with direct drive or spur gear drive, with a propeller of three fixed ever-clean-with and fibre-repellent blades - are used for applications: In the recirculation of activated sludge from nitrification stages into denitrification stages of aeration tanks - and for the economic pumping of rainwater, river water, surface water, and water from the polder (at low discharge heads) - and for the flow creation in waters, for example in entertainment parks. weniger anzeigen

The high-speed submersible mixer type Amamix, with a self cleaning ECB-(ever clean blade)-propeller, is used for the handling of waste water - and is used for: sludge silos, expansion tanks, faecal tanks / waste water tanks, rain overflow basins, digestion towers, thickeners, nitrification tanks, denitrification tanks, bio-p-tanks and flocculation tanks, - and for biogas installations in biogas digesters (fermenters), biogas post digesters,biogas slurry tanks, biogas mixing tanks and digesters. The mixer is also used for pump well installations - and as a flow accelerator in theme parks and for, for keeping areas free of ice. weniger anzeigen

The fully floodable submersible propeller mixer Amaprop is powered by three-phase asynchronous motor with a short circuit rotor. The mixer is used for: mixing fermenting substances, avoiding of floating or sinking layers, for the intensive mixing of liquids in reserve containers, in final repositories, in slurry tanks - and for flow creation in nitrification and denitrification stages. The mixer is used specifically for the treatment of municipal and industrial effluents and sludge and for applications of biogas. weniger anzeigen

Amarex N for stationary or transportable operation are available in executions with or without ATEX. Amarex N sewage pumps are used for pumping all kinds of water and waste water, for example elimination of waste water and faeces, pumping of sewage containing long fibers as solid substances, gas-and air-containing media, raw, activated and digested sludge pumping, drainage / water extraction, dry attitude flooding risk rooms or areas in the municipal, industrial and commercial sectors. For wet-well or floodable dry installation. Amarex-ND: Open, diagonal single-vane impeller, suitable for fluids containing solid substances and long fibres. Maximum head is 15 m, free passage up to 76mm. Amarex-NF: Free flow impeller, suitable for fluids containing solids and stringy material as well as fluids with entrapped air or gas. Maximum head is 38 m, free passage up to 100mm. Amarex-NS: Impeller with cutter, suitable for domestic sewage and waste water containing faeces and long fibres. Maximum head is 49 m. weniger anzeigen

Amarex submersible motor pumps are available in wet-well or floodable dry installation executions for stationary or transportable operation. The Amarex-KRT is used for pumping all types of sewage and effluent in water treatment and industry, especially untreated sewage with long fibrous and solid substances, liquids containing air and gas as well as raw, activated and digested sludge. The Amarex-KRT is available in the following installation types: -D: Stationary dry installation, vertical (S1 duty) -H: Stationary dry installation, horizontal (S1 duty) -K: Stationary wet installation (S1 duty with motor outside the fluid possible) with guide wire arrangement or guide rail arrangement -S: Stationary wet installation (S1 duty with submerged motor) with guide wire arrangement or guide rail arrangement -P: Transportable wet-installed model (S1 duty with submerged motor) weniger anzeigen

Single-stage volute casing pump with submersible hydraulic for vertical installation in closed, upright tanks under atmospheric pressure, ratings to EN 733 up to an immersion depth of 2000 mm. The motor end is to be installed dry. Handling of neutral degreasing and phosphating, washing water with degreasing agents, paints, etc. Especially for the industrial, commercial and public sectors. weniger anzeigen